icon_p
icon_m
icon_k
icon_n
icon_s
icon_middle

Solid Carbide TRISTAR Drill Series Mini Size ø1.0mm – ø2.9mm L/D=2 – 50

dvas_tit_en-gl.png

dvas_main.png

A New Standard.
No Flexing, No Breakages, No Delays

Faster cycle times and higher accuracy.

Features

dvas_01_en-gl.png

Mitsubishi Materials unique coolant holes with TRI-Cooling Technology.

TRI-Cooling is optimal for small-diameter drills and can achieve more than double the conventional coolant discharge volume. This can dramatically improve chip discharge and heat dissipation, contributing greatly to tool life stability.

dvas_02_en-gl.png

Large coolant holes reduce tool damage due to the improved cooling effect thereby greatly improving tool life.

Increased coolant flow provides effective cooling even in difficult applications or when using an oil based cutting fluid.

dvas_03_en-gl.png

Tough, sharp cutting edge design.

The straight cutting edge and thinned point are connected with a smoothly curved geometry that significantly improves fracture resistance. The geometry of the rake angles and lands also improves wear and chip disposal.

dvas_04_en-gl.png

New XR point thinning, reduces cutting load and optimises chip flow.

The new point thinning breaks chips into the optimum shape for streamlined flow and achieves a much lower cutting resistance.

dvas_05_en-gl.png

Unique flute form for greater rigidity. Applies to L/D=2, 7, 12

The short drill is designed for high rigidity and good chip evacuation by minimizing the neck length.
A chip discharge area is provided over the taper part, increasing the tool rigidity by 20% more than the conventional model as well as improving the hole position accuracy.

dvas_06_en-gl.png

Comparison of Tool Rigidity

dvas_07_en-gl.png

Comparison of Straightness

dvas_08_en-gl.png

Deep Hole Machining Example

For deep holes it is recommended to use a pilot drill to improve hole entry and reduce deviation at the exit point.

dvas_09_en-gl.png

New Coated Grade DP1120

DP1120 is applied a special multi-layer PVD coating and a micro-grain, cemented carbide substrate. The outstanding surface smoothness prevents chip clogging that reduces breakage.
Additionally the excellent abrasion resistance maintains cutting edge sharpness to enable long
tool life.

dvas_10_en-gl.png

Cutting Performance

SCM440 Comparison of Fracture Resistance

DVAS has excellent fracture resistance and double tool life compared to conventional products.

dvas_11_en-gl.png

SUS304 Comparison of Welding Resistance and Chip Disposal under High-efficiency Cutting

It achieves excellent welding resistance and chip control for drilling stainless steels.

dvas_12_en-gl.png

SCM440 L/D=40 Comparison of True Straightness

The hole bends are significantly reduced as compared to conventional products.

dvas_13_en-gl.png

side_banner_email_en-gl.png
side_banner_youtube_en-gl.png
Page Top