icon_p
icon_m
icon_k
icon_n
icon_s
icon_h
icon_rough

Multi-functional Indexable Insert End Mill

aqx_tit_en-gl.png

aqx_main.png

A multi-functional milling tool with a
center cutting edge.

aqx_01_en-gl.png

Feature

Heat Resistant Body

The body of the tool is made from a special alloy
steel that has high heat resistant properties.
A special surface treatment is used to increase wear
and corrosion resistance.

aqx_02_en-gl.png

2 Insert Bottom Cutting Edge

The lower cutting edge consists of 2 inserts,
resulting in higher cutting edge strength and
increased tool life.

aqx_03.png

One Insert Type

Tool management is simplified by using only one
type of insert for all 4 cutting edges. By rotating the
inserts it’s possible to use all 4 corners.

aqx_04_en-gl.png

Center Cutting Edge

The AQX is designed with a center cutting edge,
making it possible to sink, helical mill and pocket
without a pre-prepared hole.

aqx_05_en-gl.png

Through Coolant Holes

The body is designed with through coolant holes to improve cooling and chip disposal.
The AQX is also available without coolant holes.

aqx_06.png

Short Edge Type

An economical short edge type body is available with only 2 inserts for short depth of cut applications.

aqx_07_en-gl.png

Undercut Type

The cutting edge diameter DC has been designed so it is larger than the shank diameter DCON,
making it possible to machine vertical faces without any interference.

aqx_08_en-gl.png

New PVD Coated Grades MP6100/MP7100/MP9100

Wide range of grades for specific materials MIRACLE SIGMA accumulated Al-Ti-Cr-N based PVD coating

aqx_09_en-gl.png

TOUGH-Σ Technology

A fusion of the separate coating technologies;
PVD and multi-layering realises extra toughness.

PVD Accumulated Coating

aqx_10_en-gl.png


Dramatically improving the heat and wear resistance!

aqx_11_en-gl.png

Excellent welding resistance due to low coefficient friction!

aqx_12_en-gl.png

Wide Range of Inserts

M2 Breaker

aqx_13.png

Economical molded inserts.
Suitable for machining a wide range of work materials under various cutting conditions.

G1 Breaker

aqx_14.png

High accuracy peripherally ground inserts.
Large rake angle to provide high cutting edge sharpness.
An HTi10 insert is available with a polished rake face to prevent welding problems when machining aluminum alloys.

side_banner_email_en-gl.png
side_banner_youtube_en-gl.png
MIRACLE SIGMA
Page Top