MS plus Series

icon_p
icon_m
icon_n
icon_s
icon_h
icon_shiage
icon_middle

Carbide end mills

msplus_tit_en.png

msplus_main_04.png

Tough applications require ''Plus'' performance

(Al,Ti,Cr)N multilayer coating (MS Plus)

Our original coating technology enables a multilayer of (Al,Ti)N and (Al,Cr)N. It allows machining of a wide range of workpiece materials.

msplus_11_en-gl.png

RADIUS END MILLS

MPXLRB

Suitable for high precision and high efficient machining of die & mold.
Vibration control geometry is adopted for more than ø1 mm sizes.
4-flute is adopted in ø0.4‒6 mm sizes.

msplus_18_en-gl.png

Cutting Performance

NAK80 High Quality Surface Finishes

msplus_19_en-gl.png

MPMHVRB

A high-efficiency 4-flute radius end mill with irregular helix flutes and a wide range of application.

msplus_16_en-gl.png

Cutting Performance

AISI 304 Vibration Resistance Comparison

msplus_17_en-gl.png

SQUARE END MILLS

MPMHV/MPJHV

The irregular helix geometry reduces vibration to enable efficient machining of carbon and stainless components.

msplus_12_en-gl.png

CUTTING PERFORMANCE

Comparison of surface roughness

Good surface with no chattering due to irregular helix.

msplus_14_en-gl.png

Comparison of feed rate

Up to double the feed rate of conventional end mills.

msplus_15_en-gl.png

BALL NOSE END MILLS

MP2SDB

Tough carbide substrate with high chipping resistance.
Ideal for semi-finishing of forging dies.

msplus_07_en.png

CUTTING PERFORMANCE

Resistance to chipping

MP2SDB shows excellent chipping resistance even at large depths of cut,high feed rates and long overhang applications.

msplus_08_en-gl.png

MP3XB

Ideal for rough milling of long overhang applications and semi-finishing of forging dies (40-50 HRC)

msplus_09_en-gl.png

CUTTING PERFORMANCE

Resistance to chipping overhang length 40mm

Continued reliability when rough milling long overhang applications.

msplus_10_en-gl.png

MP2SSB/MP2SB/MP2MB/MP2XLB

Greatly improved wear resistance even when machining hardened materials.

MS plus provides long tool life on materials up to 52HRC.
For steels harder than 52 HRC, IMPACT MIRACLE end mills are recommended. (TOOLS NEWS B075)

msplus_02_en.png

msplus_13_en-gl.png

CUTTING PERFORMANCE

Carbon Steel S50C

MS plus gives excellent wear resistance and significantly longer tool life compared to conventional products when machining carbon steel.

Stainless Steel STAVAX (52HRC)

MS plus shows higher wear resistance compared to conventional products when machining stainless steel.

side_banner_email_en-gl.png
side_banner_youtube_en-gl.png
MIRACLE SIGMA
Page Top