MC5005 / MC5015

icon_k
icon_shiage
icon_middle

ISO Insert Series for Cast Iron Turning

mc5005_mc5015_tit_gl.png

mc5005_mc5015_main_gl.png

Reduced cycle times!
New coating for speeds up to 600 m/min.

MC5005/MC5015

Extra thick Al2O3 coating layer

Achieved by combining the latest coating technologies.

mc5005_mc5015_01_en.png

Patented technology

Nano-Texture Coating Technology

The optimised crystal growth, Nano-Texture coating technology gives outstanding wear and chipping resistance.

mc5005_mc5015_04_en.png

Conventional technology

mc5005_mc5015_02_en.png

Nano-texture

mc5005_mc5015_03_en.png

TOUGH-Grip Technology

The interface between the layers is controlled at the nano level, allowing the TOUGH GRIP layer extremely high levels of adhesion to prevent delamination.

mc5005_mc5015_05_en.png

TOUGH-Grip performance comparison
Conventional thick layers show the adverse affects of peeling.

mc5005_mc5015_06_en.png

Application range
Speeds normally associated with ceramic grades are now achievable. Reduction of costs when machining cast iron parts by using high efficiency methods is now possible because of improved tool life and cutting edge reliability.

New chip breaker system for cast iron turning

The entire range of new chip breakers has been designed by taking advantage of the properties of the new grades.
Each breaker has the optimum suitability for each respective application.

Negative Inserts LK/MK/RK/Flat Top, GK/MAbreaker

Chip breaker is selectable according to the machining conditions.

ブレーカ

Positive Inserts MKbreaker/Flat Top

Chip breaker is selectable according to the machining conditions.

mc5005_mc5015_09_en.png

Application map for cast iron

mc5005_mc5015_10_en.png

Technical Data

Continuous cutting of FC300

mc5005_mc5015_11_en.png

FCD700 interrupted turning

mc5005_mc5015_12_en.png

FC300 Parts trial No.2

Higher wear resistance than ceramic grades.

mc5005_mc5015_13_en.png

side_banner_email_en-gl.png
side_banner_youtube_en-gl.png
MIRACLE SIGMA
Page Top