DLE

Drill Diameter Selection

When Chamfering

With respect to guide hole diameter D, select the drill diameter (cutting diameter) DC to be within the range of D < DC < 2D.

tec_drilling_guidance_dle_01_en-gl.png

When Centering

The tool cannot be used for processing if the centering diameter has the same guide hole diameter as drill diameter DC. Refer to the usable length LU as a guideline.
In the case of tip diameter SIG 60 °, 90 °, about DC/4 which becomes a two-step point angle area does not become the bottom hole of 60 °, 90 ° respectively and chamfering is not possible.< 2D.

tec_drilling_guidance_dle_02_en-gl.png

OPERATIONAL GUIDANCE

tec_drilling_guidance_dle_03_en-gl.png
Page Top