MNS

Operational Guidance

MNS

Operational Guidance for MNS...DB Drills

Flat Face Drilling

Drilling a blind hole

1. Drilling a pilot hole

2. Initial cutting with the long type drill

1. Drilling a pilot hole 2. Initial cutting with the long type drill


3. Drill the deep hole


4. Drill retraction

3. Drill the deep hole 4. Drill retraction

Interruped Drilling

•Drilling and breaking through on irregular faces or angles

1. Spot facing

2. Drilling a pilot hole

1. Spot facing 2. Drilling a pilot hole


3. Initial cutting with the long type drill


4. Drill the deep hole

3. Initial cutting with the long type drill 4. Drill the deep hole


5. Breaking through


6. Drill retraction

5. Breaking through 6. Drill retraction
Technical Information / Cutting Formula

Introduction

Turning Tools

Rotating Tools

ISO13399

General Standard / Other Materials

side_banner_contact_en-gl.png
side_banner_email_en-gl.png
side_banner_youtube_en-gl.png
Page Top