Arbors for Screw-in Tools

How To Install the Screw-in Head

1. Thoroughly clean the clamp section of the head and the arbor with an air blower or brush before installation.
2. Tighten the head at recommended torque and ensure that there is no gap between the head and arbor.

HOW TO INSTALL THE SCREW-IN HEAD
スクリューインヘッド取付け要領

•Cutting tools become extremely hot during cutting. Never touch them with bare hands after operation as this mayproduce risk of injuries or burns.
Do not handle the cutting tools with bare hands as this may cause injuries.

Page Top