NON-COATED CBN

Sintered Alloy Machining • Cast Iron Machining MB4120/MB710/MB730/MBS140

NON-COATED CBN / MB4120,MB710,MB730,MBS140

Sintered Alloy Machining

tec_cbn_pcd_non_coated_01_en-gl.png

NON-COATED CBN / MB4120,MB710,MB730,MBS140

tec_cbn_pcd_non_coated_02_en-gl.png

Recommended Cutting Conditions

Sintered Alloy Machining

tec_cbn_pcd_non_coated_03_en-gl.png

Cast Iron Machining

tec_cbn_pcd_non_coated_04_en-gl.png
Page Top

MB4120

• The first recommendation that can be widely used for continuous to interrupted cutting of sintered alloy and cast iron.

FEATURES

High Fracture Resistance

Fine CBN particles increase cutting edge toughness. The high fracture resistance allows stable performance even during interrupted machining.

High Adhesion Strength of Fine CBN Particles

Optimization of the sintering conditions strengthens adhesion between fine CBN particles. This increases both fracture resistance and wear resistance.

tec_cbn_pcd_non_coated_05_en-gl.png

Application Example

Fracture Resistance Comparison During Interrupted Facing of High Strength Sintered Alloy

tec_cbn_pcd_non_coated_06_en-gl.png

Comparison in Continuous Machining of AISI No 35 B

tec_cbn_pcd_non_coated_07_en-gl.png
Page Top