Effects of Cutting Conditions for Turning


Ideal conditions for cutting are short cutting time, long tool life, and high cutting accuracy. In order to obtain these conditions, selection of efficient cutting conditions and tools, based on work material, hardness, shape and machine capability is necessary.


P Class Grade Tool Life
M Class Grade Tool Life
K Class Grade Tool Life

Effects of Cutting Speed

1. Increasing cutting speed by 20% decreases tool life by 50%. Increasing cutting speed by 50% decreases tool life by 80%.

2. Cutting at low cutting speed (20–40m/min) tends to cause chattering. Thus, tool life is shortened.


When cutting with a general type holder, feed is the distance a holder moves per workpiece revolution. When milling, feed is the distance a machine table moves per cutter revolution divided by the number of inserts. Thus, it is indicated as feed per tooth. Feed rate relates to finished surface roughness.

Effects of Feed

Effects of Feed

1. Decreasing feed rate results in flank wear and shortens tool life.

2. Increasing feed rate increases cutting temperature and flank wear. However, effects on the tool life is minimal compared to cutting speed.

3. Increasing feed rate improves machining efficiency.


Depth of cut is determined according to the required stock removal, shape of workpiece, power and rigidity of the machine and tool rigidity.

Effects of Depth of Cut

1. Changing depth of cut doesn't effect tool life greatly.

2. Small depths of cut result in friction when cutting the hardened layer of a workpiece. Thus tool life is shortened.

3. When cutting uncut surfaces or cast iron surfaces, the depth of cut needs to be increased as much as the machine power allows in order to avoid cutting impure hard layers with the tip of cutting edge to prevent chipping and abnormal wear.

Depth of Cut and Flank Wear Relationship in Steel Turning
Roughing of Surface Layer that Includes Uncut Surface
Page Top