MP9005 / MP9015 / MP9025 / MT9005 / MT9015

icon_s
icon_shiage
icon_middle
icon_rough

ISO Turning Inserts for Difficult-to-Cut Materials

mp_t9000_tit_04.png

mp9005_mp9015_mt9015_main_gl.png

The new high Al-rich (Al,Ti)N single layer coating significantly reduces edge fracturing.

PVD coated grade MP9005/MP9015/MP9025

mp_t9000_01_en-gl-2.png

High Al and Conventional Coating Comparison

The high Al-rich (Al,Ti)N single layer coating provides stabilization of the high hardness phase and succeeds in dramatically improving wear, crater and welding resistance.

mp_t9000_02_en-gl-2.png

Carbide grade (Non coated) MT9005/MT9015

mp_t9000_03_en-gl-2.png

Chip Breaker System

Negative Inserts

mp_t9000_08_en_gl-2.png

Positive Inserts

mp_t9000_09_en_gl-2.png

Precision Chip Breaker System

Positive Inserts

mp_t9000_12_en_gl-2.png

Cutting performance

Comparison in Continuous Machining of Precipitation Hardening Stainless Steels AISI 630

mp_t9000_14_en_gl-2.png

Inconel718, vc=100 m/min Continuous Machining

mp_t9000_10_en_gl-2.png

MP9015 with LS breaker was smallest damage.

mp_t9000_11_en_gl-2.png

Chip Control when Back Turning

Non-tangling of chips when back turning Inconel718.

mp_t9000_06_en_gl.png

Inconel718, vc=30 m/min Interrupted Machining

mp_t9000_15_en-gl-2.png

Application Examples

mp_t9000_07_en_gl.png

side_banner_email_en-gl.png
side_banner_youtube_en-gl.png
banner_env_en-gl.png
Page Top